Wood-burning sauna stove Feringer Malyutka Up to 16 m3 – Screen

The modern market for heating devices offers many options, depending on the size of the premises prepared for them, the required power value, aesthetic preferences and the buyer’s budget. Based on reviews and descriptions of Feringer furnaces, we can conclude that they are in great demand due to their efficiency and durability. The equipment was developed and assembled by the plant of the same name over the course of two years, undergoing repeated testing. The manufacturer tried to take into account the tastes of consumers and current trends in the heating sector. As a result, Feringer stoves were created, which have a wide range of models and are recognized as one of the best in Russia.

Features and device

The design of the units of the Voronezh plant is distinguished by:

• Oxygen supply through channels at the top of the door equipped with fire-resistant glass.
• Lack of grate and ash pan in the oven.
• Fuel combustion occurs in a top-down direction.

Feringer brand sauna stoves are available with closed and open heaters, closely adjacent to the combustion chambers. This makes it possible to increase the intensity of heating the stones: in the first case up to 700 °C, in the second - up to 400 °C, which creates light steam. Due to the design of the combustion channels and the supply of air into them from above through the grate, the glass of the stove doors is protected from soot settling. There is a stone blowing function, used to select the desired mode in the steam room.

After burning wood in Feringer sauna stoves, according to reviews from their owners, a small amount of ash is formed in the firebox, which makes it possible not to clean it up to 20 loads. This is due to complete combustion of wood. There are types with stone lining of the body, which increases its heat transfer. The entire range of stoves is equipped with a spark extinguishing mechanism that prevents spontaneous sparks from flying out of the pipes and, accordingly, fire in the room.

Design features

The first thing that catches your eye is the elongated shape and a rather voluminous firebox.
Moreover, if you look at the Feringer sauna stove in a horizontal section, it turns out that the firebox is surrounded by stones on almost all sides. And the heat from the wall of the firebox is transferred to the stones, from them the screen is already heated, and then the room is heated by radiant heat from the screen. Feringer furnace section

Another feature is the firebox without grates. This is because the top combustion principle is used. With this option, the firewood is lit not from below, as we are used to, but from above. This principle makes it possible to use the heat from burning wood to the maximum. In this position, the coals are constantly in the combustion zone. As a result, there are almost no unburned residues. If there are a few coals left, then only those that burned last.

The next design feature is the presence of a smoke tooth and a side combustion system. They also ensure that more heat goes to warming up the heater rather than escaping into the chimney. The side burning system is a special design in the firebox in which the coals do not lie in the center, but are scattered throughout the stack, igniting the wood lying on the side. After all, in wood-burning stoves this is the zone that burns the worst. In Feringer stoves, the entire surface of the wood burns.

The smoke tooth, located in the upper part of the firebox, twists the flame at the top in a spiral (look at the photo). In this way, the flame stays in the firebox longer, heating up the walls more strongly, and small remnants of it end up in the pipe. But the heat that inevitably ends up in the chimney can be used to heat the steam room. For this, Fehringer has several solutions:

• A heater on a pipe in a traditional and non-traditional design: with a mesh or a decorative carved screen.
• Controlled convector on a pipe.
  This is a device with a duct system around a main metal pipe. Diagram of air movement during furnace operation

When installing a controlled convector at its very bottom, immediately after the stove is lit, boiling water is poured. As flue gases pass through, water turns into steam and enters specially formed lamella channels. Since moist air (steam) has a large heat capacity, passing along the wall, it takes away and transfers more heat.

Types of stoves

The Voronezh plant produces wood-burning devices for saunas, baths, home heating and cooking. The first are represented by a series of Feringer sauna stoves, the Golden Section, with open heaters. They quickly heat up the room, allowing you to get soft, healing steam. The possibility of smoke is eliminated, and thanks to the use of Vortex technology, the stoves are characterized by high heat transfer. This Feringer series includes 3 types, and each of them has 1 modification. The difference from the standard one lies in the parameters and mainly in the difference in the dimensions of the Robax panoramic glass: for conventional stoves they are 180x200 mm, and for Screen - 310x340 mm.

Among the Feringer heating and cooking models are:

1. Economy class stove Umka-150.

Burning duration is 8 hours with a single fuel load. Equipped with a cast iron stove for cooking. When igniting, the temperature in the house rises by 16–18 °C per hour, and in the slow smoldering mode of wood it reaches 100 °C. The Lada Lamel produced by Feringer is a modification of the Umka 150 stove-fireplace. The device is distinguished by the fact that it primarily heats objects, not air, so there is no transfer of dust into the room. Due to the increased firebox and special power adjustment, the burning time of one load of firewood reaches 10 hours, which allows you to leave the operating stove unattended at night.

2. Stove-cauldron Feringer Samobranka

Includes a set of skewers, a 12-liter cast iron cauldron with an aluminum lid, and a smoking kit. The firebox is made of heat-resistant steel, the door is equipped with a gate. This is an ideal option for lovers of outdoor recreation and gardening, distinguished by its mobility and compactness. The height of the fireplace is adjusted using a special tray. The Feringer Samarkand cauldron stove is also equipped with a 12-liter cast-iron cauldron with an aluminum lid and a smoking kit. It is distinguished by its heavy weight, the presence of a chimney, 1 m long; The outlet angle is 90°, an umbrella is included.

Main technical characteristics of Feringer heating stoves, along with cooking stoves:

The range of sauna devices is represented by the Feringer Lamel and Steam Stoves series. The first models are lined with natural polished stone; you can choose 1 of 8 types of colors. Lamel Feringer includes ovens: Mini, Mini Screen, Optima, Maxi. The advantages of the first two are a high heating rate with modest dimensions, excellent for small baths. Very easy to install, economical on fuel. The basic Mini is the only oven in its series with a “telescopic tunnel”.

Optima, as the name suggests, is the best option for medium-sized steam rooms. It has an ideal ratio of size, price and power value. If you need a stove for a commercial bath or a large family, it is better to pay attention to Maxi. This device from the Feringer plant cannot be filled, and the weight of the stones included in the kit reaches 171 kg.

Steam ovens are represented by models: Malyutka, Classic and Harmony. The first two have Screen modifications. Steam ovens, according to reviews, stand out for creating a special comfortable atmosphere and saturating the space with the aroma of fire and wood. They have a closed heater lined with natural stone. Vohringer Malyutka stoves are suitable for small baths, they have the lowest cost and small dimensions (810x400x600 mm).

In the case of standard steam rooms with a volume not exceeding 18 m3, the ideal solution would be to purchase the Classic model. If you want to observe the flame in the stove, you should select the Screen modification. Harmony is designed for large baths, equipped with large Robax heat-resistant glass 380x380 mm; The dimensions of the equipment itself are 935x542x960 mm.

Design of sauna stoves - with open heater

In general, the firebox is formed mainly by stamping and bending methods, and has a minimum of seams. The seams are located in places with low temperature loads. All furnace elements are made of stainless steel with 17% alloy metal content.

In stoves with a closed heater, a cylindrical container for stones rests on the base of the stove and covers the firebox on all sides (except for the front part, where the extension or firebox door is installed). To regulate the air flow passing through the heater, there is an adjustable damper. With its help, you can reduce or increase the heating rate of the steam room.

Construction of a furnace for a Feringer bath with a closed heater

When the required temperatures are reached, the damper closes completely or almost completely. The temperature is stabilized and the steam room conditions are maintained in the specified mode.

A smoke tooth is installed in the upper part of the firebox. This is a metal piece curved in the shape of the letter “L” at the top of the firebox. It allows you to twist streams of smoke and flame into a spiral. Because of this, the walls of the firebox warm up better, and the stones warm up from it. This tooth gives another positive result: the flame rises in the pipe only 30-70 cm (in stoves of a conventional design, the height of the flame in the pipe exceeds a meter, and sometimes one and a half to two).

There is an adjustable barrier above the door (1) and below it (2)

The burning speed of wood can be changed using two dampers. One is located above the firebox door, the second below it. It is advisable not to close the upper damper completely: it ensures that there is no soot on the glass. Always leave at least a minimum gap of a couple of millimeters, and the glass on the door will always be clean.

These two dampers regulate the amount of air supplied to the firebox. The more air, the more actively the wood will burn. This mode is necessary at the stage of heating the steam room and stones. Then, when the temperature is close to the required one, they cover themselves and the wood smolders, maintaining the temperature of the stones and practically stopping the heating of the steam room.

Getting steam

Deep inside the heater is a device called a steam gun. This is an L-shaped tube with holes. Another tube is welded to it, which goes to the top of the heater. Water is supplied to it and converted into steam.

This is how a steam gun works

Through small holes in the horizontal tube, water flows into the hottest part of the heater - onto the lower stones. Their temperature is 500-550°C. As a result, tiny droplets are formed, which have a high temperature at the outlet. They are very small, they are almost invisible. This state of steam is called “light”. Probably because after vaping you feel light in your body and never have a headache.

The atmosphere in a steam room consists of many components. The air and walls warm up from the radiation of the stove body and pipe, from the steam that is supplied to the heater. You need to change the temperature in the steam room by manipulating the modes of these elements. There are dampers/gates for this.

How to adjust the combustion intensity and heat transfer of the housing has already been explained (using the valves near the door). It is also necessary to control the air flow through the chimney convector. For this purpose, there is also a valve/gate in its upper part. By moving its handle to the right/left, you open/close, completely or partially, the lumen of the air tubes.

Devices for adjusting combustion intensity

The new Ferniger stoves of the Lamel series have another powerful tool: the heater ventilation valve. At the initial stage, when the stones warm up, it is closed. The heater in this position is unventilated and the stones heat up to high temperatures. Then, to quickly reach the desired temperature, the valve opens.

While this is happening, the walls, floor, ceiling, and shelves are warming up in the steam room. As bath experts say: the steam room is infused. The temperature background of all its parts is equalized. It is in this state of affairs, when heat comes from the walls, and from the shelf, and from the ceiling, that the body warms up deeply. There is no heat. You feel only an even warmth that does not burn, like in a dry air vent, but envelops you, warming you up.

This is a live steam gun

The temperature drops slightly. But if it is within the normal range (50-55°), there is no need to raise it again: with each supply of steam it will jump by about 5°C. So, if you raise the humidity, you will also raise the temperature. And before steaming with brooms, you need to warm up two or three more times. During this time, it will grow another 10-15 degrees.

There are fewer requirements for sauna stoves, and their structure is simpler. Their main task is to quickly heat the steam room to the required temperature, and then ensure its maintenance.

Design of sauna stoves from Fehringer

There is almost no steam in dry-air steam rooms; if you occasionally add one or two ladlefuls, then more for aromatization. Therefore, the volume of the heater is small - it should be enough to heat the steam room. They do not perform any other functions.

Adjusting the combustion intensity is the same as in sauna stoves: a valve above and below the fuel door.

We did not take into account the impressions about using the stoves that are on the manufacturer’s website. We present only those posted in discussions on the forums.

Philip, Priozersk

Nikolay, Moscow

Vladimir, Peter

Wood-burning sauna stove Feringer Malyutka Up to 16 m3 – Screen

CHOOSE YOUR GIFT WHEN BUYING A OVEN

Check with our operators for details. +7 495 64 24 054

People say: “Small but brave.” These words can be attributed to the wood-burning stove Malyutka Steam Screen. Of course, it is not capable of heating a large steam room, but it will cope with its task in a small one. High heat transfer will save on fuel. It is made of durable, heat-resistant, 3 mm stainless steel, which can be easily doused with water and get the long-awaited steam. The appearance of the oven is very attractive; the large door screen with special glass only adds to the ambiance. The entire stove is decorated with an intricate design, the small crevices of which allow you to see the shimmer of stainless metal. A special water supply tank installed above the heater supplies the steam room with steam. The stove was created specifically for your comfort with the Russian bath mode!

DESIGN FEATURES OF OVEN SERIES “PS”

STAINLESS STEEL FIRES AISI 439

Steel with the presence of titanium in combination with a low carbon content and a high chromium content has a very high scaling temperature. (metal scaling is the destruction of metal as a result of the interaction of gases with iron at high temperatures.) AISI 439 steel is destroyed at temperatures above 850°C, which other steel grades cannot boast of. However, it is worth remembering that in the firebox of any furnace the temperature reaches up to 700 – 800°C. The oven is designed to last 7-10 years if properly maintained and used once or twice a week. One load of firewood (10–15 kg) is enough for the combustion process to last for 2-4 hours

VORTEX SYSTEM

A distinctive feature of the stoves is the “Vortex” technology, thanks to which the maximum amount of heat is generated when burning a small amount of wood. There are no knees and labyrinths. Reducing the flame height in the chimney is achieved thanks to the Vortex system, which creates a vortex effect in the firebox. Equipment safety is improved, and the stones in the kiln heat up faster.

CLOSED HEATER

A large volume of stones is heated to temperatures of 400-500°C, which is sufficient to produce “light” (fine) steam, while the steam room does not overheat, since the heater is closed. It is saturated with heat from burning wood and then distributes it evenly throughout the steam room. Thanks to the closed heater, the stones become very hot, and only then does the heat enter the room, heating it to a temperature of no more than 50-60°C. The stones heat up and by applying water to them, you can get a large amount of finely dispersed steam, which has a healing effect on the human body.

EQUIPMENT EXPANDING THE FURNACE CAPABILITIES

Steam stoves for the Feringer bath create the ideal Russian bath regime and provide suitable temperature conditions and humidity levels. The telescopic tunnel makes installation of the stove easier. Using our website, you can buy a wood-burning sauna stove Malyutka steam Screen with a guarantee from the manufacturer, and with fast delivery!

OVEN PORTAL IN THE INTERIOR

WARRANTY

• The manufacturer guarantees that the furnace meets the technical requirements provided that the consumer complies with the conditions of transportation, installation and operation.
• The warranty period for furnace fires is 3 years from the date of sale through a retail chain.
• The manufacturer undertakes to repair or replace faulty furnace parts free of charge during the warranty period.
• The oven is designed to last 7-10 years if properly maintained and used once or twice a week.
• The stove can be used in public baths and steam rooms continuously, but due to the fact that in this case the load on the stove increases beyond the norm by several times, the manufacturer disclaims all warranty obligations
• The manufacturer reserves the right to change the appearance and dimensions of the models, as well as the installation principle, without prior warning.
• Note: Natural stone is unique, so there may be significant differences in the color shade and pattern of the stone from the stated photographs on the manufacturer’s website, in printed materials and accompanying documents.

Dear customers and partners!
We would like to inform you that it is prohibited to use saline solutions when operating Feringer & Co furnaces. It is permissible to supply only clean water without impurities to cassettes, stones and PiFs. The use of salt leads to the formation of corrosion on the metal, the appearance of an unpleasant odor and shortens the service life of the stove. The instruction manual (section “Order of use” p. 32-33) states that the use of saline solutions is prohibited and entails loss of the manufacturer’s warranty.

Our works | Oven Information | Delivery and payment | Contacts

Ferginger stove models

This brand produces both sauna stoves - with a closed heater, and sauna stoves - with an open one.

The category of sauna stoves is called “steam stoves” by Fehringer. There are five options. Their technical characteristics are presented below. The price is indicated approximately in dollars due to exchange rate instability.

Furnace models

If we talk about modifications of stoves to create a Russian bath mode, then there are three models:

• Feringer Malyutka Steam for small steam rooms up to 16 cubic meters;
• Feringer Classic - for medium volumes - up to 18 cubic meters;
• Feringer Harmony for steam rooms up to 30 cubic meters.

All of these ovens have the same internal structure, only the dimensions differ. The stoves can be equipped with solid cast-iron doors, doors with glass or a panoramic screen (the result is a fireplace stove).

Technical characteristics of Feringer sauna stoves with a closed heater (to enlarge the table, right-click on it)

Lamel stoves are included in a separate category.” They also create the atmosphere of a Russian steam room. They are made entirely of AISI 430 stainless steel, 3 mm thick.

This is what the lamellas look like

In this option, you can order a stove with an open heater and a closed one, with a stacked lamella (from several pieces) or a solid one. The stone used is soapstone, serpentine, jadeite, marble and numerous combinations thereof. Moreover, the thickness of the finish can be different. Therefore, overall dimensions are not indicated.

Technical characteristics of Feringer Lamel sauna stoves (to enlarge the table, right-click on it)

In an open heater, the top of the container can be trimmed with metal or stone. The screen can be a regular size, or it can look like a fireplace portal. So the prices here are really “from” - the cheapest option.

These stoves have an open heater. In the catalog they are located in the “Golden Ratio” section. The table summarizes the main technical data; the price is indicated for the option with a standard door with transparent glass. It is possible to install a panoramic screen.

Technical characteristics of Ferniger sauna stoves (to enlarge the table, right-click on it)

This is one of the sauna stoves - the “Golden Section” series

Features and models of Feringer furnaces

Feringer ovens from the manufacturer can be classified as follows:

1. Sauna stoves (can be with open or closed heater).
2. Heating stoves with a hob (may have a water heating circuit, a cooking panel or a cauldron insert).

As mentioned above, all Feringer models are produced without a grate, because the fuel combustion pattern is completely different. The firewood burns from the top to the bottom row of logs and leaves almost no coals. As a result, a huge amount of heat is released, and the stove can be cleaned less frequently.

The manufacturer promises that cleaning is done every twenty cycles, but reviews from owners of Vöhringer stoves make the opposite statement. In practice, it is necessary to clean the combustion chamber after complete combustion of the fuel at the fifth or sixth filling. At the same time, this is also a very good indicator.

To warm up the room faster, you can use a ventilation valve that controls air access to the stones. While it is in the closed position, the oven chamber becomes very hot. After all, you just need to open the damper so that circulation through the chamber begins, and the heated air quickly spreads throughout the steam room.

All Feringer models have an L-shaped combustion outlet that functions like a smoke tooth in a fireplace. The flames immediately swirl, causing the lower part of the chimney to also heat up. Due to it, the heat transfer area becomes larger. At the same time, the fire becomes smaller, the height of the flame in the chimney becomes about 30-70 cm.

Bath stove

As mentioned above, a sauna stove can be produced in two versions: with a closed and open heater, for baths and saunas, respectively.

A Feringer stove with a closed heater is called a “steam stove.” There are five options.

Their technical characteristics are shown below.

As for stove models to create the atmosphere of a Russian bath, the following variations are available:

1. Mehringer Malyutka Steam oven, reviews of which indicate excellent functionality in small steam rooms up to 16 m³.
2. Feringer Harmony stove, which is suitable for large rooms of 30 m³.
3. Feringer Classic stove, reviews from the owners of which confirm the purchase of models for medium-sized steam rooms up to 18 m³.
4. All models have a similar “filling”, the only difference is in size. The stove set may include doors made of cast iron, glass or panoramic doors.

Technical characteristics of Feringer sauna stoves with a closed heater.

Sauna stove Feringer Harmony

The Feringer Lamel oven stands out separately. They also create the atmosphere of a Russian bath. They can be with an open or closed heater. They are made of high-quality stainless steel, three millimeters thick. Soapstone, serpentine, jadeite and many combinations are used. Moreover, the finish can vary in thickness.

Technical characteristics of Feringer Lamel sauna stoves.

In models with an open heater, the top of the container is sometimes trimmed with metal or stone. The screen can have a standard size or be a fireplace portal. This is the reason for the difference in cost.

The Feringer wood-burning stove with an open heater belongs to the “Golden Ratio” series. Below you can see the main technical characteristics and cost for the model with a regular door with transparent glass. If desired, you can install a panoramic screen.

Technical characteristics of Feringer open-heater stoves.

Sauna stoves Castor and Magnum have also proven themselves well.

Heating and cooking stoves

As you can already guess, the difference between stoves with a heat exchanger is that they are not intended for bathing rooms, but for heating small rooms through a water circuit and parallel cooking:

1. The Feringer Umka 150 oven is popular, with only positive reviews. Equipped with a cast iron stove. One load of fuel is enough for 8 hours of continuous burning. Heating is carried out at an optimal speed of 17 °C/hour. The model can heat a room with a volume of up to 100 m³, and the built-in water circuit makes it possible to heat adjacent rooms when connecting batteries.
2. The Lada Lamel stove is characterized by large dimensions of the firebox and operates without a fuel supply for up to 10 hours.
3. Samarkand is a stove-cauldron with a cast iron container of 12 liters. The set includes a set for smoking and kebabs. Plus a chimney pipe, an umbrella and an outlet corner.
4. The self-assembly is considered a small analogue of the previous model. Her weight is 17 kg. It is characterized by a simple design; the kit does not include an additional chimney pipe.
As users of Samarkand and Samobranka advise, after purchasing the models, the cauldron insert must be calcined with salt or oil. This will make it possible to remove any remaining lubricant from the molds where production casting was carried out.

Stove-cauldron Feringer Samobranka