Stylish firewood racks, 20 photos

A sauna requires a lot of firewood, so steam lovers stock it up for future use. dried logs.

The volume of solid fuel storage is determined by the frequency of use of the sauna and the number of people wishing to improve their health - the duration of burning wood in the stove.

Shelter structures for woodpiles are designed in a stationary design when fuel consumption is high, and portable - when the bathhouse is used occasionally.

Types and advantages of wood burning for a bathhouse near it

The combination of the development and landscape of the land plot, the wealth of the owner, and the appearance of the bathhouse determines the type and location of the block for storing a supply of logs.

There are many options for the placement and design of firewood racks near the bathhouse: each steamer brings his own vision of the convenience of using the sauna to the standard design.

exist .

Attached to the wall

The attached woodshed is arranged in the same style as the bathhouse. Particular attention is paid to the roof . It is important that the drain does not leak into the adjacent storage area. Isolation of logs from the log wall should prevent the penetration of wood pests into the structures of the main structure. Fire danger is a significant disadvantage of this arrangement.

Under the same roof

A firewood storage and a bathhouse under a single roof are arranged when logs are the main type of fuel for the steam room.

This option is a special case of constructing a complex structure for a utility block and sauna in accordance with the project developed before construction.

In order for the bathhouse with firewood to fit organically into the design of the buildings on the site, the combination must be planned at the stage of working out the placement of the object.

Carefully! Fire safety with this storage location is given special attention.

Autonomous

The woodshed near the bathhouse is an autonomous woodshed. It is a covered space protected from rain and snow on all sides. The logs are isolated from contact with the ground by a gap of ≥10 cm. The walls should not be too dense - air circulation is carried out through them to dry the firewood in the woodpiles. A positive point: the ability to store brooms prepared for the winter for the steam room.

Portable

The portable firewood holder for a bathhouse has compact dimensions, which allows you to carry logs in your hands for 1–2 fireboxes.

Such storage belongs to the short-term category, for the period of warming up the steam room.

The supply of firewood and logs from the mobile basket is consumed quickly; it is not considered as a way to save from precipitation.

Serial with accessories

Serial firewood for logs and bath accessories is offered by many manufacturers at a relatively low price: from one and a half to 5 thousand rubles. This is not only a means for placing firewood, a poker and a scoop near the firebox, but also a thing with artistic features that can enliven the interior. Models of firewood racks made of forged metal are especially attractive.

Each of the listed types of wood burning for a bath has advantages and disadvantages. But under some circumstances, the disadvantages become advantages.

Choosing the type of wood burner

Once the location for construction has been determined, you can begin to select the type of structure. At this planning stage, it is necessary to determine the size of the structure depending on how much firewood will have to be stored throughout the year. The first thing that needs to be done at this stage of construction is to decide on the budget and whether you will build an outbuilding from new or scrap materials. There are a huge number of types of woodsheds, because everything here depends on the imagination and capabilities of the owner of the site and his family members:

Building a firewood shed: how to do it yourself

This type of work is available to anyone who owns a carpentry tool. First you need to decide on the materials and location of the object, and draw a plan.

The procedure for constructing the storage facility is as follows:

Pre-construction stage: choose a location near the front door and material. For a log and frame-panel building, a wood firewood rack is suitable; a metal structure goes well with brick walls.
The construction of a foundation for the frame is required when the soil is weak. The simplest foundation is a columnar base: holes are dug according to the number of supports and lined inside with roofing felt, and formwork is placed above the ground. The marks are leveled and poured with concrete, having previously inserted reinforcement and embedded parts.

Important! Further construction continues after the mortar has set.

The installation of the firewood frame for the bathhouse is made of wood using galvanized fasteners. 100 mm square timber : purlins are cut into the supports halfway and holes are drilled for the bolts.

The upper contour is constructed in the same way, and the intermediate height is filled with purlins made of 50 mm timber. The finished frame is sheathed with a board 3 cm thick and 15 wide with a ventilation spread of 20 mm . The wood is painted or impregnated with an antiseptic.

Arrangement of a canopy over the storage is the final stage of construction. The most common roof option is a pitched roof with a slope of 10º . The sheathing is made from boards 10x3 cm with a spacing of 100 mm. The profile sheet is attached with self-tapping screws.

The floor is laid along the bottom trim of 40–50 mm boards . There is no need to hang the door.

A real Russian bathhouse has always been heated with wood, but a good owner prepares it in advance. It is necessary to prepare a specially designated place so that the wood is at hand, and if it is necessary to add firewood to the firebox, a firewood rack is used.

Firewood bins or woodpiles can be classified according to the type of construction:

The former have compact sizes and attractive appearance, since these are metal or wooden products designed for a small amount of firewood. Outdoor and attached ones are a small shed or shed in which the main supply of wood for heating the bathhouse is stored.

Firewood boxes are made from three types of materials:

Stages of building a woodshed with your own hands

Neat and aesthetically pleasing

Firewood is a universal fuel. In some regions they are the main heating material, while in others they are used to fire rooms such as, for example, a sauna stove. You can’t do without them when grilling kebabs, and a simple picnic in nature goes much better with a fire, which is easier to make from pre-stocked firewood, rather than from “quickly” collected raw branches and sticks. This means that the fuel needs to be stored somewhere, and for this it would be good to make a woodshed with your own hands. This is one of the easiest structures to build.

If you decide to build such a storage facility, the question arises of how to make a firewood rack with your own hands. After all, firewood scattered haphazardly will get wet in the rain, will burn poorly, and will require long-term drying before use.

To avoid such problems, you need to choose the time and make a woodshed with your own hands. Of course, you can simply stack the firewood near the house or bathhouse and cover it with some material. But then the natural moisture that is present in any wood will not leave the logs. And you can’t stack a large volume of firewood this way. In addition, making a woodshed yourself is very simple, and in the photo such buildings look very interesting. It turns out that there will be something to brag about to the guests.

Advice from the master!

Of course, today gas is most often used for heating, but for emergencies a gas-and-wood combined combustion system is also used.

How to choose a place and material for firewood

The woodshed is often combined with buildings where temporarily unnecessary things are stored, such as watering cans, hoses, bicycles, etc., that is, with sheds.

The barn, despite its secondary role in the household, must be built so that it is accessible at any time of the year (even in a snowy winter) and does not spoil the appearance of the country house or home yard. Since the construction is done with your own hands, you can choose absolutely any location.

Most often, the firewood shed is placed on the north side of buildings, because less snow blows there in winter. But if it is closed by walls on all sides, this rule may not be followed. The main thing is that the door is placed on a convenient side. The woodpile must be laid so that it does not crumble when firewood is taken from it. Since you will be folding it yourself, this is easy to achieve.

Firewood warehouse with decorative stacking

Before starting construction, you need to carefully measure everything and bring in all the required amount of building material. For example, both round logs and beams of a sufficiently large cross-section can be used for pillars.

For flooring and wall upholstery, it is enough to purchase a slab, but if not only the functionality, but also the appearance of the structure is important to the owner, then you will have to buy the so-called commercial timber.

Advice from the master!

When constructing the roof of a barn, like any other structure, you can use various materials: slate, iron, profile, etc. It all depends on the financial capabilities and desires of the owner. It is important that the selected material is easy to install with your own hands, without special tools or professional builders.

Preparatory work

Whatever material is chosen for construction (wood or metal), a certain sequence of work should be followed. This is necessary so that the building stands strong, remains level and beautiful.

Assembling a wooden structure

First you need to clear the area where the firewood shed will be built. Marking the place will help you select and prepare the building material correctly in the future. Often the firewood rack is placed adjacent to the steam room, since firewood is mainly used to heat the sauna stove. In this case, it will be possible to save building materials, since one wall is already there, and it will be necessary to install two more and a roof. Even a simple woodpile should be as protected from precipitation as possible.

It is very important to make a woodshed of such a size that you can put all the fuel stored for the winter in it. To do this, preliminary calculations are made: how much firewood is needed for a home stove, how much it will take to regularly heat the stove for a bathhouse, etc. If you store firewood outside piled in a woodpile, you will still need to create some kind of fortifications so that it didn't fall apart.

To make it easier to assess the scale of construction, you can limit the location of the future structure to simple beams. When you lay them on the site, you will see how level it is. This will help you understand how to make the structure durable.

How to do it yourself?

It is worth noting that metal woodpiles are not cheap, so some craftsmen try to make them with their own hands. Anyone can master the technology; you just need to have the required amount of material and welding on hand. More complex models with metal patterns require a certain level of skill, but a simple design can be made by yourself if you follow the following steps.

Take four metal rods and cut them so that they are the same length, 350 mm each. You will need to weld a square from the blanks.
Take two rods and make a structure out of them in the form of a large English Y. The length of the rods is 1.7 meters. It is necessary to ensure that the space between the horns is equal to the size of the sides.
Weld the blanks made in the previous step to the square in the middle of the two sides.
Make the sidewalls according to the same principle as described in the first paragraph, only the height will depend on the wishes of the master.
Cut sheet metal to the shape of the bottom and weld it. If it is not there, then it is permissible to use rods, after which they are welded along the bottom to form a lattice.
Weld the rods on the sides to prevent firewood from falling out.

The metal at the junction of the welds will need to be cleaned to remove irregularities and give the structure a more attractive appearance. Afterwards, the product is coated with paint of the desired color, which will additionally protect against the negative effects of moisture and protect against corrosion.

If you don’t have rods at hand, but a profile pipe is enough, then you can weld the structure from this material.

First, blanks are made, which then simply need to be welded together.
3 long pipes are cut, which will determine the length of the future firewood. The distance between them that is comfortable for the room in question is calculated; there should be 6 such blanks.
For the sidewalls, 4 sections of profile pipe are cut, they will determine the height of the structure.
Now two long pipes and short ones are welded to form a base. Another long piece is welded in the middle and two short ones across it.
On the inside, the pipes that will form the sides are welded at the corners; on top, the structure is completed by welding small pieces along the width of the firewood box.

All joints are also well sanded, and the product is coated with paint.

If you don’t want to make a completely metal structure, then you can make a wicker firewood box.

To work you will need:

Woodpile material

The firewood rack should serve for a number of years, so its choice must be approached thoroughly. First of all, you need to decide what material to build it from: wicker, wood, or metal.

Woodpiles are:

wooden. They can be made both portable and outdoor. The main thing: do not forget about treating wooden structures with special protective agents. The disadvantage of such a firewood rack is that it lasts a relatively short period of time;
metal. It happens that metal firewood racks are placed as decorative stands for firewood in the dressing room, where they serve for beauty and to create coziness. If they are made for external use, the metal must be treated with an anti-corrosion solution. Such forged firewood boxes last much longer than wooden ones;
wicker. They are easy to carry firewood in and can be used as a stand. They can serve to decorate the interior, but require more careful treatment;
combined. There are firewood stands made of wood, metal, and woven material. There are various options available here.

Stylish firewood racks, 20 photos

If you have a fireplace, it’s time to think about proper storage of firewood, because you can’t just leave it outside. You can always store firewood in a garden shed or garage, but it can also become damp and spoiled. The best option is to arrange a special place for storing them. It will not only be convenient and useful, but will also fit into the overall interior of the house or decorate your yard.

Fireplace logs

A kind of stand for storing logs is called a firewood rack. It is made from any material, often metal. It can be forged or wicker, made in a minimalist style, or vice versa, be very unusual. With the help of a firewood rack, you can diversify the decor of your home. Most often, metal models are chosen, as they are more reliable and convenient.

A wall niche can be a suitable place to store firewood

You can also come up with the design of a metal firewood rack yourself, which will look harmonious in the interior of the room. When decorating, you can use your imagination and create unusual elements that will prevent your firewood from looking boring.

Types of structures

You can build a woodpile yourself, with your own hands, or you can purchase it in a store or specialized workshop.

Firewood racks also differ by type of purpose.:

Portable ones hold a small amount of firewood needed for one firebox. They come in compact sizes and do not require much effort to carry.
Outdoor autonomous ones are built on an independent foundation, usually not far from the steam room.
The street ones attached to the bathhouse are built against the wall of the bathhouse in the same style as the main building.

Choosing a location for the woodshed

The first thing to do is to correctly determine the construction site. When choosing a place to build a woodshed, you should be guided by rationality. The structure for storing natural fuel should not be visible, because it is not a building that is the accent of the yard. But at the same time, it is recommended to place it close to home. Remember that you will have to carry firewood, and this is not such an easy physical labor. At the same time, it’s great when there is an entrance to the woodshed. With this approach, bringing fuel to the storage location will not be difficult.

The woodshed should be hidden from prying eyes and be close to the room that is heated

If you do not heat your house with a fireplace or wood-burning stove, the fuel storage location must be located near the bathhouse. This kind of structure should be convenient, and firewood will always be at hand.

To choose the “right” place to build a woodshed, draw a site plan. This will allow you to better plan construction and determine the most suitable location. It is worth giving preference to hills. Experts do not recommend building a woodshed in the lowlands, as moisture accumulates there, and this is of no use to the firewood.

Woodshed in the form of a low canopy in the courtyard of the house

The woodshed can be built as a separate structure, but very often it is made as an extension to a house, bathhouse or barn. It depends on your personal priorities, the size of the plot, and your imagination. Simple designs allow you to build an amazingly beautiful structure.

Advantages of forged products

A forged metal stand for firewood in a bathhouse is designed for long-term service, and therefore requires especially serious treatment. Compared to other types, it has a number of undeniable advantages:

has higher resistance to changes in temperature and humidity, which is very important for a bathhouse due to the constant presence of water and steam;
Possibility of use both outdoors and indoors;
reliability under heavy load.

With the right choice, a forged woodpile will delight the owner with durability and strength, an elegant appearance, openwork intricate patterns will emphasize the aesthetic taste of the owner.

The firewood stand should complement the overall picture of the room and harmoniously match the rest of the accessories and the style of the interior.

Firewood models

Models of woodpiles have different appearance, design and complexity of design.

They will appeal to different beauty connoisseurs. Some come with a horizontal, stable surface for firewood and curved graceful legs. Lovers of the classic style will find a firewood rack with smooth curved lines.

For those who like simpler options, stands with a bottom in the shape of a circle or crescent are suitable. They will have a minimum number of decorative elements, which will not affect the characteristics of the product in any way. All types of products are equipped with comfortable handles that allow you to carry firewood.